FAST SD-CLEAN ROLLER DOOR
Rapid roll-up door designed for especially for installation in cleanrooms, labs and all those areas of controlled environment.
Able to withstand large pressure differentials and endure a great movement of people and materials.
Ideal for laboratories, food industry and areas with high hygienic level and controlled environment, they need to comply with hygienic requirements and important sealing
High speed of opening and closing.
Frame and curtain of canvas to choose among several possibilities, including door viewers.
It acts with different opening systems.
- Self-supporting metal frame:
- in aluminium.
- in stainless steel.
- sheet metal painted and anticorrosive Primer in polyurethane (colour RAL).
- Top drawer rounded, flat areas without edges.
- Lateral guides with silicone gasket.
- Backdrop: canvas polyester with viewing windows of high resistance to wear, corrosion and discoloration. Self-extinguishing M2 fire resistance.
- Repairable lateral system in the event of a collision.
- Three-phase motor with electric brake of soft stop c/c++ and manual release.
- Mechanical limit switches integrated in the motor for door position control.
- Standard speed between 1 and 1.8 m/s.
- Security systems.
- Optional: opening by battery type SAI.
- Optional: sluicing between doors (SAS) system.
Maximum dimensions: 3600 mm. X 3800 mm.
Minimum threshold: 400 mm.
Vertical Bracelet (non-drive side): 130 mm.
Vertical wrist (motor side): 450 mm.
Construction with a self-supporting chassis completely in aluminium with inclined drawer, no flats and no edges, intended to avoid the accumulation of dust.
Lacquered in white colour
Guides practically watertight, with silicone seals. Prepared to withstand a pressure of up to 22pa (according to measurements).
All of our doors are made with high quality plastic canvas with resistance to wear, abrasion, discoloration and comply with certificate flame retardant type M2. Colors in samples (red, yellow, green, dark blue, blue light, white, black, grey, cream, orange).
All welds made on the canvas are made by high frequency welding.
Polyester support: 1100 Dtex.
Total weight: 900 g/m2
Breaking strength: 400 / 360 daN / 5 cm
Tear resistance: 80/60 daN
Adhesion: 12 daN / 5 cm
Temperature resistance: - 30 ° 7 + 70 °
Lacquered: 2 faces
Windows: PVC, glass of high resistance
Three-phase motor with direct attack on the primary shaft, electric brake of soft stop c/c++ and manual release of the crank at the height of the engine. Limit switches mechanical or encoder integrated in the engine to control the position of the door at any moment.
Voltage: 220 / 380
Power: 0.75 3 CV according to door
Protection: IP 54
Input rpm: 1400
RPM output: 92 142
Through photocells transceiver in the vertical door guides, with security system type test before performing maneuvers of closing.
Bottom of the curtain with conveyor systems antisquash safety, with detector type optical supervised at all times, inside bottom of danger, signposted as mobile danger zone finished yellow diagonal stripes in black. Signal system of the same type Radioband radio monitored before the closing manoeuvre, thus avoiding the placement of curly dock type cables.
Optionally door can provide a system of opening by battery type ups (uninterrupted power supply) in case of alarm or power supply failure.
Control unit with frequency inverter. Motor controlled digital limit. (OPTIONAL)
Metal box for the maneuvers of control, designed for Speed Door España complying with regulations of electric protection of low voltage. In the joins a circuit board with control logic, designed to perform thousands of operations a day, equipped with LEDs for control functions or possible anomalies of the door.
Contactors, motor guard, adjustable, pre-installation of detector receiver, magnetic or flashing lights. Buttons for opening, closing, emergency stop and led indicator of voltage on front cover. Connection to their diet with 1.5 metres of cable 5 x 2.5, with plug 16 A Cetac type.
In Speed Door we have a wide range of drives with different controls, buttons, and other systems to optionally include in our doors, with the aim of facilitating the transit of goods, personal or vehicles.
-Motion and presence detector.
-Interconnection with any machine, roller, or assembly line.